Often seen in home décor, holiday clothing, costumes, and other items, metal threads add a dazzling glamor and bright color to any kind of project. Although it's hard to say that metal filets are not lovely to decorate, one thing you can definitely agree on is that computer browsers find it difficult to use for decorating.

The explanation is the structure of the thread. A sheet of metallic foil is wrapped around the core to form a metallic thread thicker and coarser than normal thread.

It makes the tube more vulnerable to cracking or shedding, in particular as a result of its torsion.

However, a few basic changes can be made to guarantee a high quality finished product and a smooth production cycle, as all other stick projects do.

1. Using the right needle:

There are many special needles for different types of threads and fabrics. Metallic stickers have a bigger button, making it easier to push the pin.

This extra space reduces the friction of the needle and thread such that thread breaks and shredding are avoided.

If it is difficult to use a special metal needle, use a bigger stick needle, including sharpening needles 80-12 or 90-12 depending on the weight of the thread. A 50-weight thread, for example, does not require an 80/12 needle and a 75/11 needle may be appropriate.

A needle of size or 2 is, however, a 40- or 30-weight metallic thread. In any case, if it is available as long as the fabric is also included, it is safer to use a larger needle.

Remember, bigger standard stick needles will pocket larger holes into the textile. Use a special metal thread needle if possible because a greater hole will not be punctured.

2. Decreasing Speed:

Regardless of the make or model of a sticker, when dealing with metal threads the speed must be slowed down. Higher speeds create more friction and the last aim is to reduce the friction as much as possible when dealing with metal thread.

Machines can be speeded-mounted at between 500 and 600 points per minute. Metal threads can be operated at higher speeds but only rarely depending on the needle and cloth.

But, in other cases, the output will inevitably be slowed down by thread breaks and shredding.

3. Reduce strain:

Lock the tension of the top thread of the working needle in order to reduce pressure and stress on the tape.

Make minor adjustments to your tension and check the design in a similar piece so long as the machine's thread, backing and fabric combination is comfortable.

4. Avoid complex designs:

Open and simple designs without heavy or thick fills. Pick. Most possibly, heavy stitch counting designs cause thread breaks.

Pick lengths of stitch for longer; the shorter the stitches, the easier it is to cut and split the thread.

5. Refrigerate Threads:

True, when prone to a warm environment, threads are likely to split, so is this risk reduced if stored in the cold?

Stickers have sworn 30 minutes to an hour before they were put for years by placing metallic Threads in a freezer. The cold makes it eat more fluently and does not twist as much as the thread bends when it leaves the spool.

6. Use lubricant:

Because the ultimate aim is to reduce the friction with metallic thread, needle lubricant is another way to safely move the thread through both thread and needle trajectories. Sewer is When

Help lubricant is intended to be put in the needle, in order to minimize pressure between the eye and the film.

You can also put a drop on a thread strand and move it through all areas of the thread course. In these places, this should help to reduce the pressure rather than just the needle.

7. Polish your Machines:

Any burrs on the thread route can cause the metallic threads to split immediately.

While minor burrs won't be too harmful when working with normal thread, when operating with metallic threads, the machine should be in tip-top conditions.

You should polish all eyelets or openings of thread path burrs with the cord of the crocus.

8. Materials Affect Production:

Metallic threads are less vulnerable to break up and help with softer materials.

Move away from your own tip, if possible; pre-wound scoops are more accurate.

For better performances, wear wound size L bobbins.

9. Try a horizontal spool pin:

Seek to buy or build a horizontal spool pin if all the other settings fail. The thread normally flows vertically to the unit, which causes it to twist.

If you turn the thread horizontally, it will move the thread to feed off the spool just like the thread was wounded.

10. Beware of certain fabrics:

For holding a very sensitive cloth, such as silk, it can be too rough a metallic thread, causing the textile to break. Pay attention when attaching large designs using baby clothes metallic thread, which can irritate the skin of the infant.

When you use metallic thread, aim to cover the stitches and prevent skin discomfort with a soft fusible backpack after browning.